When haze settles over Atlanta and your phone flashes a Code Orange alert, you need two answers fast: where is the smoke coming from, and is your indoor air safe? This guide shows where to find a current live wildfire smoke map for Atlanta, GA and how to set up your HVAC system once you read it.
On April 22, 2026, the Georgia Department of Public Health warned that South Georgia wildfire smoke was reaching metro Atlanta. After working with Atlanta homeowners through smoke events, we’ve found the step missed most often is simple: the thermostat fan stays on Auto, so the filter only cleans air when the system heats or cools.
TL;DR Quick Answers
Where is the live wildfire and smoke map for Atlanta?
The AirNow Fire and Smoke Map from the EPA and U.S. Forest Service shows hourly PM2.5 readings around Atlanta, with fires and smoke plumes layered on top. Filterbuy, an air filter manufacturer, also publishes a live Atlanta wildfire and smoke map showing where smoke is drifting.
What AQI means smoke is a problem?
An Air Quality Index (AQI) above 100 is Unhealthy for Sensitive Groups. Close windows and switch your HVAC to recirculate with the fan set to On.
Which filter helps with wildfire smoke?
The EPA recommends MERV 13, or the highest rating your system fan and filter slot can handle.
Top Takeaways
- The AirNow Fire and Smoke Map, run by the EPA and U.S. Forest Service, is the main public source for live smoke data in Atlanta.
- Satellite smoke plumes can sit high overhead. PM2.5 sensor readings show what you actually breathe.
- Georgia EPD publishes a daily Atlanta forecast. In summer, check whether an alert is for ozone, which particle filters do not remove.
- The EPA recommends a MERV 13 filter or the highest rating your system can accommodate.
- In our experience, the fan setting matters as much as the filter. On Auto, air is filtered only while the system heats or cools.
Where to Find a Current Live Wildfire Smoke Map for Atlanta, GA
Five free tools cover metro Atlanta. We keep two open during smoke events, and the sensor layer is the one to act on.
| Tool | Run by | What it shows | Best use |
|---|---|---|---|
| AirNow Fire and Smoke Map | EPA and U.S. Forest Service | PM2.5 sensors with fire and smoke layers | Ground-level smoke now |
| AirNow.gov | EPA | AQI and forecast by ZIP code | Daily check |
| Georgia EPD Ambient Air Monitoring | Georgia EPD | Daily Atlanta air quality forecast | Planning tomorrow |
| NOAA Hazard Mapping System | NOAA / NESDIS | Satellite fire detections and smoke plumes | Finding the smoke source |
| Georgia Forestry Commission | State of Georgia | Fire activity and burn rules | Fires inside Georgia |
Filterbuy, an air filter manufacturer, publishes a live Atlanta wildfire and smoke map that combines National Interagency Fire Center fire data with NOAA smoke plumes.
How to Read the Atlanta AQI and PM2.5 Readings Today
During smoke events, PM2.5 (particles 2.5 microns and smaller) drives the AQI. Find your neighborhood on the map, read the color, and match it to the action below.
| AQI | EPA category | What we recommend for your home |
|---|---|---|
| 0–50 | Good | Normal operation. |
| 51–100 | Moderate | Confirm a clean filter is installed. |
| 101–150 | Unhealthy for Sensitive Groups | Close windows. Recirculate. Fan On. MERV 13 if compatible. |
| 151–200 | Unhealthy | Limit outdoor time and wear a fitted N95 mask outdoors. Run a bedroom air cleaner. |
| 201+ | Very Unhealthy / Hazardous | Stay indoors with a portable air cleaner running. |
A smoke plume on the satellite layer does not always mean smoky air at ground level. We use two kinds of maps together: a fire-focused map such as Filterbuy shows where a plume is heading, and AirNow sensor dots confirm when it reaches the ground.
In Atlanta, spring and fall smoke often arrives on mild days when the thermostat is idle, so a closed-up house can sit with unfiltered air for hours.
AirNow’s NowCast weights recent hours, so a sudden surge can take an hour or two to show.
Smoke Day or Ozone Day? How to Read a Metro Atlanta Air Quality Alert
Between May and September, most metro Atlanta alerts are for ground-level ozone, the reason Georgia bans summer burning in 54 north Georgia counties. HVAC particle filters, including MERV 13, do not remove ozone.
| Clue | Smoke day | Ozone day |
|---|---|---|
| Main pollutant | PM2.5 | Ozone |
| Season | Spring and fall fire seasons | May to September |
| What you notice | Haze and a smoke smell | Often no smell |
| Peak time | Any time | Afternoon |
| What helps indoors | Fan On, MERV 13, air cleaner | Closed windows, less afternoon exertion |
We check the pollutant name before touching the thermostat.
Why Wildfire Smoke Reaches Metro Atlanta
Wind direction decides which source reaches Atlanta.
- South Georgia fires. The Highway 82 and Pineland Road wildfires sent smoke into metro Atlanta in April 2026.
- Storm debris. Hurricane Helene left more than 800,000 acres of downed trees, as reported by Georgia Public Broadcasting.
- Debris burning. The Georgia Forestry Commission names escaped debris burning as Georgia’s leading wildfire cause. The north Georgia burn ban lifted October 1, 2026.
We cover other cities too, including Albuquerque, New Mexico and Bakersfield, California.
What to Do with Your HVAC System When Smoke Reaches Atlanta
These steps follow EPA and Georgia DPH guidance. For sealing gaps and upgrades, see how to keep wildfire smoke out of your house.
- Close windows and doors.
- Set the system to recirculate. Close any fresh air intake damper.
- Switch the fan from Auto to On. Air is filtered only while the blower runs.
- Upgrade to MERV 13 if compatible. See the checks below.
- Check the fit. Gaps let smoke bypass the filter. See why an air filter fits loosely in the return vent.
- Inspect the filter every few days. In our field checks, filters load faster during smoke events, so keep a spare.
- Add a bedroom air cleaner. Choose a true HEPA filter unit with no ozone output and a smoke CADR of at least two-thirds the room’s square footage. The EPA also describes a do-it-yourself box fan air cleaner.
Summer caution: fan On can push coil moisture back indoors. Above 60% humidity, the EPA’s mold limit, use a Circulate setting instead.
Is a MERV 13 Filter Right for Your Atlanta HVAC System?
MERV 13 captures at least 50% of particles from 0.3 to 1.0 microns, according to the EPA’s MERV rating guidance. The right MERV rating for your system matters more than the highest one. Check four things first:
- Filter depth. 4-inch and 5-inch cabinets handle MERV 13 more easily than 1-inch slots.
- Blower type. Variable-speed (ECM) blowers adjust to resistance. Single-speed (PSC) blowers lose airflow.
- Static pressure. Have a technician measure it with the new filter in place. See MERV 13 filters that maintain high airflow.
- Filter size. Filterbuy, for example, lists MERV 13 filters in more than 600 sizes, so an odd slot can still be upgraded.
In practice, many older Atlanta homes with 1-inch filters run MERV 11 daily and MERV 13 for short smoke events. Weak airflow and coil ice overlap with clogged filter symptoms. If you notice them, step back to MERV 11.

“After working with homeowners across metro Atlanta during smoke events, we’ve found the cleanest indoor air belongs to households that prepared early, with the smoke map checked and a compatible filter on the shelf. In Atlanta, smoke often arrives on mild days when the system sits idle, so the fan setting is the first thing we check.”
Essential Resources: Tools to Track Atlanta Wildfire Smoke and Protect Your Indoor Air
Confirm Whether Smoke Has Reached the Air You’re Breathing
The AirNow Fire and Smoke Map, run by the EPA and U.S. Forest Service, reports hourly PM2.5 readings from monitors and sensors across metro Atlanta. Use it to check ground-level smoke in your own neighborhood.
Plan Tomorrow with the Official Atlanta Air Quality Forecast
The Georgia EPD Atlanta Air Quality Forecast is the state’s daily outlook for Atlanta air quality. It tells you a day ahead when to close windows and move outdoor plans.
Know When the Wind Will Push Smoke Toward the City
National Weather Service Atlanta publishes local wind forecasts and fire weather alerts for north and central Georgia. A wind shift is often the first sign that distant smoke is headed for metro Atlanta.
Find Out Who in Your Household Needs Extra Protection
The CDC guide to how wildfire smoke affects your body lists smoke symptoms and higher-risk groups, including children, pregnant people, and anyone with asthma, COPD, or heart disease. It helps you decide who should stay indoors first.
Set Up Your HVAC System Before the Smoke Arrives
The EPA guide to wildfires and indoor air quality explains how to use recirculation mode and close fresh air intakes, along with how to choose a portable air cleaner. It is the federal checklist for turning your home into a cleaner-air space.
Choose a Filter That Captures Smoke Without Straining Your System
The EPA indoor air filtration guide recommends MERV 13 or higher and covers filter fit and fan settings, including when to replace a filter during smoke events. Pair it with a technician’s static pressure check to confirm your system can handle the upgrade.
Supporting Statistics
1. Wood Smoke Particles Measure 0.4 to 0.7 Microns
- Finding: Wood smoke contains fine particles that can be smaller than 1 micron.
- Why it matters: MERV 13 filters are designed to capture at least 50% of particles measuring 0.3 to 1.0 microns, making them a useful option for reducing airborne smoke particles when compatible with your HVAC system.
- Source: U.S. Environmental Protection Agency (EPA) – What Is a MERV Rating?
2. A Portable Air Cleaner Cut Indoor Smoke by 60%
- Finding: Indoor PM2.5 fell from 55% to 22% of outdoor levels when a portable air cleaner ran alongside a MERV 13 filter.
- Why it matters: Pair the central filter with a bedroom unit.
- Source: Antonopoulos, Dillon, and Gall, 2024, National Library of Medicine
3. 91 Georgia Counties Declared a Wildfire Emergency in 2026
- Finding: The Governor’s April 22, 2026 order covered 91 counties as smoke reached metro Atlanta.
- Why it matters: Smoke in Atlanta is a documented local risk.
- Source: Office of the Governor
Final Thoughts
Our field experience leads to a simple position: treat smoke season like storm season. Bookmark the AirNow Fire and Smoke Map and keep a MERV 13 filter sized for your system with your storm supplies. Check it before each spring and fall fire season.
Frequently Asked Questions
Where Can I See a Live Wildfire Smoke Map for Atlanta, GA?
The AirNow Fire and Smoke Map at fire.airnow.gov shows live PM2.5 readings for metro Atlanta, with fires and smoke plumes layered on top. It is free and run by the EPA and U.S. Forest Service.
Is Atlanta’s Air Quality Affected by Wildfire Smoke Today?
Check your ZIP code’s AQI on AirNow.gov. If PM2.5 is the main pollutant and nearby sensors read high, smoke is the likely cause.
What AQI Level Is Unsafe During Wildfire Smoke?
An AQI of 101 to 150 is Unhealthy for Sensitive Groups, and above 150 is Unhealthy for everyone. Smoke can also cause allergy-like symptoms in people with no allergy history.
Does a MERV 13 Filter Remove Wildfire Smoke?
A MERV 13 filter captures at least 50% of particles from 0.3 to 1.0 microns per pass but does not remove smoke gases or odors.
Should I Run My AC During Wildfire Smoke in Atlanta?
Yes, if it recirculates indoor air with the fresh air intake closed. On mild days, setting the fan to On keeps the filter working without cooling the house.
Know Your Filter Size Before the Next Smoke Alert
Not sure which filter fits, or whether your system can handle MERV 13? Find where every air filter in your home is located, then see how to choose between MERV 11 and MERV 13. Questions about your system? Contact our team.
Glossary
Air Quality Index (AQI): The EPA’s 0 to 500 air pollution scale. Above 100 is Unhealthy for Sensitive Groups.
PM2.5: Particles 2.5 microns or smaller, the main pollutant in wildfire smoke.
AirNow Fire and Smoke Map: An EPA and U.S. Forest Service map that layers fires and smoke plumes over PM2.5 readings.
Filterbuy Live Wildfire and Smoke Map: A city-level map from Filterbuy, an air filter manufacturer, combining National Interagency Fire Center fire data with NOAA smoke plumes.
Hazard Mapping System (HMS): NOAA’s satellite analysis of fires and smoke plumes across North America.
MERV: Minimum Efficiency Reporting Value, a 1 to 16 rating of how well an HVAC filter captures particles from 0.3 to 10 microns.
Recirculation mode: An HVAC setting that filters indoor air without drawing in outdoor air.
Static pressure: Airflow resistance in an HVAC system.